Liquid Nitrogen Tanks
ISO Tanks, Transport Tankers and Nitrogen Pumping Unit.
ISO Tank 5000 Gallon
Type of vehicle | 3-Axles Cryogenic Semi-trailer |
Design code | ASME Ⅷ, Division 1. CGA341-2007 |
Optimized | LIN, LOX, LAR |
Gross Capacity (Warm) | 28,000 Liter |
M.A.W.P | 10bar |
Tare weight | 13,800 Kg |
Payload | 21,492 Kg (95%LIN) |
Gross weight of trailer | 35,292 Kg |
Dimension-Semi-trailer | 11,753mm*2,495mm*3,600mm Max. 3% tolerance of weight |
1. Pressure vessel | |
Design code | ASME Ⅷ, Division 1 |
M.A.W.P | 10bar |
Material | Stainless Steel, ASME SA240 304 |
Min. design temp | -196 c |
Baffles | Stainless Steel, Cone |
Piping material | Stainless Steel, ASME SA-312 Type304 |
2. Outer Jacket | |
Design code | CGA341-2007 |
Design Pressure | -1 bar |
Design Temperature | Normal |
Material | Carbon Steel Q345R GB713 |
Rear head | Stainless Steel, ASME SA240 304 |
Front head | Carbon Steel Q345R |
3. Insulation | |
Type of Insulation | Multi-Layer super insulation SI |
Shipping vacuum | Less than 7.5 micron |
NER | 0.29% in LIN per 24 hours |
4. Plumbing | |
Valve types | Main operational valves-Herose globe valves |
Safety relief valves | 2 units per CGA calculation |
Piping material | Stainless Steel, ASMESA-312Type304 |
Pressure build-up coil | Aluminum star fin tubes with stainless steel core tube |
Liquid Nitrogen Transporter Tanker
Type of vehicle | 3-Axles Cryogenic Semi-trailer |
Design code | ASME Ⅷ, Division 1. CGA341-2007 |
Optimized | LIN, LOX, LAR |
Gross Capacity (Warm) | 28,000 Liter |
M.A.W.P | 10bar |
Tare weight | 13,800 Kg |
Payload | 21,492 Kg (95%LIN) |
Gross weight of trailer | 35,292 Kg |
Dimension-Semi-trailer | 11,753mm*2,495mm*3,600mm Max. 3% tolerance of weight |
1. Pressure vessel | |
Design code | ASME Ⅷ, Division 1 |
M.A.W.P | 10bar |
Material | Stainless Steel, ASME SA240 304 |
Min. design temp | -196 c |
Baffles | Stainless Steel, Cone |
Piping material | Stainless Steel, ASME SA-312 Type304 |
2. Outer Jacket | |
Design code | CGA341-2007 |
Design Pressure | -1 bar |
Design Temperature | Normal |
Material | Carbon Steel Q345R GB713 |
Rear head | Stainless Steel, ASME SA240 304 |
Front head | Carbon Steel Q345R |
3. Insulation | |
Type of Insulation | Multi-Layer super insulation SI |
Shipping vacuum | Less than 7.5 micron |
NER | 0.29% in LIN per 24 hours |
4. Plumbing | |
Valve types | Main operational valves-Herose globe valves |
Safety relief valves | 2 units per CGA calculation |
Piping material | Stainless Steel, ASMESA-312Type304 |
Pressure build-up coil | Aluminum star fin tubes with stainless steel core tube |
180K Soundproofed ZONE II HP Nitrogen Pumping Unit
Distinctive Features:
The division assets are brand new & equipped with the latest technology in The market.
Has a wide range of pumping rate in the onshore & offshore–zone II
Has the capability of vaporizing & pumping nitrogen @ high rate / high Pressure
Has the capability of vaporizing & pumping nitrogen @ high rate / high Temperature
Complies with the onshore / offshore industry HSE safety standards.
Specifications:
Area Classification | Zoon II |
DNV 2.7.1 | Onshore / offshore certified skid and lifting specs |
Engine | Detroit Engine 8V92 / 500 HP Pyroban |
Transmission | Hydrostatic drive gear box which runs all hydraulic systems |
Pump | ACD Triplex 1.625” bore WP of 10,000 psi. Test pressure 15,000 psi. |
Vaporizer | 180,000 SCFH at 70 degree F. |
Discharge | Discharge is 2” 1502 Weco thread for connecting to treating iron. All discharge ports and fittings are MPI certified and Hydrotested to 10,000 psi. Remote controlled discharge valve |
Pad Eyes | Protection/Lifting frame and pad eyes are MPI inspected and certified. |